Giỏ hàng của bạn đang trống!
Danh mục sản phẩm
- KHUYẾN MÃI (22)
- Raspberry Pi 5 (5)
- SẢN PHẨM MỚI NHẤT (35)
- ASUS Tinker (42)
- Chơi âm thanh (9)
- Màn hình (49)
- Raspberry Pi 4 Model B (91)
- AI Computer and System on Module (50)
-
NVIDIA Jetson Nano Developer Kit (113)
- Module 4G/3G/2G/GNSS dành cho NVIDIA Jetson Nano (7)
- Màn hình LCD cho Jetson Nano (16)
- Robot dành cho Jetson Nano (2)
- Jetson AI Boards (25)
- Camera cho Jetson Nano (27)
- Nguồn cho Jetson Nano (12)
- Vỏ hộp và quạt tản nhiệt cho Jetson Nano (7)
- Module cho Jetson Nano (10)
- Phụ kiện khác cho Jetson Nano (16)
- LattePanda (36)
- BeagleBone (5)
- Raspberry Pi B+/Raspberry Pi2/Raspberry Pi3 (249)
- Raspberry Pi Zero (24)
- Module Boards (205)
- Modules cảm biến (111)
- Mạch Arduino (67)
- Mô hình Robot (18)
- Robot dành cho Raspberry Pi (7)
KHUYẾN MÃI
Dual Gigabit Ethernet Mini Box Designed for RPI CM4
Giá: 1,498,000 vnđ
Dual Gigabit Ethernet Base Board For RPI CM4
Mini, Practical, And Neat
Suitable For Evaluating The Raspberry Pi CM4 Or Being Integrated Into End Products
Dual Gigabit Ethernet Mini-Computer Kit
In addition to the Dual Gigabit Ethernet Base Board, it is equipped with Aluminum Alloy case, fan and power supply adapter
Optional Black Metal Case
Better Protection For The Base Board, Comes With a Cooling Fan For Efficient Heat Dissipation
*** for reference only, CM4 is NOT included.
Specifications
| CM4 SOCKET | suitable for all variants of Compute Module 4 |
|---|---|
| NETWORKING | Dual Gigabit Ethernet RJ45 connector |
| USB | USB 2.0 Port |
| PIN HEADER | Raspberry Pi 40PIN GPIO header |
| STORAGE | TF card socket for Compute Module 4 Lite (without eMMC) variants |
| FAN HEADER | 4-wire SH1.0 port, allows speed adjustment and measurement, 5V |
| POWER INPUT | 5V, Type-C interface |
| DIMENSIONS | 55.0 × 68.0mm |
Connecting With Compute Module 4
Standard CM4 Socket And 40PIN GPIO Header
Suitable For Compute Module 4 Lite/EMMC Series Module
*** for reference only, CM4 is NOT included.
Rich Interfaces
Precise Cut-Out With Clear Label
Each Cut-Out Is Completely Aligned With The Connector
Magnetic Design
Magnetic Removable Top With The Location Columns, Easy To Fix And
Better Protection For The GPIO Pins
Heat Dissipation Design
Metal Case For Large Area Thermal Conductivity And Heat Dissipation
Built-In Speed-Adjustable Fan With Cooling Fins, More Efficient
CÁC ỨNG DỤNG
Suitable For Raspberry Pi Or Other Industrial Occasions With Special Function Requirements
HƯỚNG DẪN LẮP ĐẶT THIẾT BỊ
CHI TIẾT TRÊN BOARD MẠCH
-
40PIN GPIO header
for connecting sorts of HAT -
CM4 Socket
suitable for all variants of Compute Module 4 -
RJ45 Dual Gigabit Ethernet Port
Dual RJ45 Gigabit Ethernet ports, 10/100/1000M compatible
ETHERNET 0: CM4 original network port
ETHERNET 1: PCIe extended network port -
USB 2.0 Type-A port
for connecting sorts of USB devices -
FAN header
for connecting the cooling fan, allows speed adjustment and measurement - Reset button
-
Boot switch
ON: CM4 would be booted from the USB-C interface
OFF: CM4 would be booted from eMMC or TF car
-
Type-C port
5V/2.5A power supply, or used for eMMC programming -
TF card slot
for connecting a TF card with a pre-burnt image (Lite variant ONLY) -
RTL8111H
Gigabit NIC chip -
Indicator
PWR: indicating the power supply status of Raspberry Pi
SYS: indicating the working status of Raspberry Pi -
SYSTEM switch
EEPROM_WP: Prevent EEPROM from being overwritten
WiFi_DIS: WiFi disabled, only for CM4 version with wireless
BT_DIS: Bluetooth disabled, only for CM4 version with wireless
HÌNH ẢNH SẢN PHẨM
KÍCH THƯỚC BÊN NGOÀI
TÀI LIỆU THAM KHẢO
Viết đánh giá
Họ và tên:Đánh giá của bạn: Lưu ý: Không hỗ trợ HTML!
Bình chọn: Xấu Tốt
Nhập mã bảo vệ: