DRF1605H Zigbee Module 1.6km Transfer CC2530 Wireless Module UART to Zigbee
Features:
- NetWork creation automatically: after power on, the Zigbee network can create automatically and the net can repair by itself.
- Data transmitter simply: the are two different methods to send data, first is clarity transceive, second is point to point.
- Simply used: customer can use it as UART cable and ignore ZigBee protocol.
- UART Interface (TX & RX) to Zigbee
- Built-in RS485 direction control
- High power module,the distance can reach 1600M
- Customer can use it with ZigBee USB mother board as follow
Electronic Parameters:
- Input voltage Standard : DC3.3V Range: DC 2.6-3.6V
- Temperature range: -40C~85C
- Serial port rate: 38400bps(Default), 9600bps, 19200bps, 38400bps, 57600bps, 115200bps
- Radio frequency: 2.4G(2460MHz), Can changed(2405MHz - 2480MHz,Step:5MHz)
- Wireless protocol: Zigbee2007
- Distance Visual distance: 1600 Meters
- Working current Sending: 110mA(Max) 50mA(Average) Receiving:35mA(Max) Standby: 40MA(Max)
- Users can customize the low-power module (standard module does not have this feature)
- Receiver sensitivity: -110 dBm
- Chip: CC2530F256,256KFLASH
- Configurable Point: Can be configured as Coordinator,Router
- Default:Router,PAN ID=0x199B,Radio Channel=22(2460MHz)
- Interface UART 3.3V (TX & RX)
- Built-in RS485 direction control, RS485 chip can directly drive
RS232 chip can directly drive
Direct USB to RS232 chip driver
Mechanical parameters:
(Top View,Uint:mm)
Tài liệu, hướng dẫn sử dụng: Tải tại đây