Danh mục sản phẩm
Hỗ trợ trực tuyến
Hỗ trợ mua hàng

Mobile: 02436.231.170

Ms Huyền - Kinh doanh

Mobile: 0984.058.846

Tư vấn kỹ thuật Raspberry Pi

Mobile: 0862.628.846

Tư vấn kỹ thuật Module khác

Mobile: 0862.998.846

SIM7070G NB-IoT / Cat-M / GPRS / GNSS HAT dành cho Raspberry Pi, global band support

SIM7070G NB-IoT / Cat-M / GPRS / GNSS HAT dành cho Raspberry Pi, global band support
SIM7070G NB-IoT / Cat-M / GPRS / GNSS HAT dành cho Raspberry Pi, global band support SIM7070G NB-IoT / Cat-M / GPRS / GNSS HAT dành cho Raspberry Pi, global band support SIM7070G NB-IoT / Cat-M / GPRS / GNSS HAT dành cho Raspberry Pi, global band support SIM7070G NB-IoT / Cat-M / GPRS / GNSS HAT dành cho Raspberry Pi, global band support SIM7070G NB-IoT / Cat-M / GPRS / GNSS HAT dành cho Raspberry Pi, global band support SIM7070G NB-IoT / Cat-M / GPRS / GNSS HAT dành cho Raspberry Pi, global band support
Nhà sản xuất: Waveshare
Mã hàng: SIM7070G HAT
Trạng thái: Còn hàng
Giá: 868,000 vnđ
Số lượng:  
   - Hoặc -   

Hỗ trợ mua hàng : 02436.231.170 or 0984.058.846

Tư vấn kỹ thuật Raspberry Pi : 0862.628.846

Tư vấn kỹ thuật Module khác : 0866.828.846 or 0862.998.846

 

VUI LÒNG LIÊN HỆ ĐỂ ĐƯỢC HỖ TRỢ KỸ THUẬT, TƯ VẤN  VÀ ĐẶT HÀNG TRỰC TIẾP  



GIẤY XÁC NHẬN MLAB LÀ ĐƠN VỊ PHÂN PHỐI CHÍNH THỨC (OFFICAL DISTRIBUTOR) CỦA WAVESHARE TẠI VIỆT NAM


SIM7070G NB-IoT / Cat-M / GPRS HAT For Raspberry Pi, Global Band Support, With GNSS Positioning


NB-IOT / CAT-M / GPRS / GNSS HAT


Low Power Narrow Band Cellular IoT Communication Module For Raspberry Pi

Based on SIM7070G, Global Band Support


+ This is a telecommunication HAT for Raspberry Pi which supports global bands of NB-IoT, Cat-M, and GPRS, as well as GNSS positioning function. Due to its advantages like small size, low delay, and wide coverage, it is the ideal choice for IoT applications such as intelligent instruments, asset tracking, remote monitoring, e-health, and so on.

+ Compared to SIM7080G, this module also supports GPRS (2G); compared to SIM7000C/E, it is more generic due to the global bands support.


Features At A Glance


+ Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards

+ Supports communication protocols such as TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT

+ Supports GNSS positioning (GPS, BeiDou, GLONASS, Galileo)

+ Onboard USB interface, to test AT Commands, get GPS positioning data, and so on

+ Breakout UART control pins, to connect with host boards like Arduino/STM32

+ SIM card slot, supports ONLY 1.8V SIM card (3V SIM card is not available)

+ 2x LED indicators, easy to monitor the working status

+ Baudrate: 300~3686400 bps

+ Common baudrate auto-negotiation: 9600/19200/38400/57600/115200 bps

+ Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)


Specifications   


 
NB-IOT/CAT-M/2G
Band NB-IoT: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66/B71/B85
Cat-M: B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26/B27/B28/B66/B85
GSM/GPRS/EDGE: 850/900/1800/1900MHz
Data rate NB-IoT: 136Kbps(DL)/150Kbps(UL)
Cat-M: 589Kbps(DL)/1119Kbps(UL)
GPRS: 85.6Kbps(DL)/85.6Kbps(UL)
EDGE: 236.8Kbps(DL)/236.8Kbps(UL)
SIM card support NB-IoT/Cat-M/2G card (1.8V SIM card ONLY)
Applicable region global
GNSS
Receiver type 16-channel
C/A Code
Band GPS L1: 1575.42 ± 1.023MHz
GLONASS L1: 1598.0625 ~ 1605.375MHz
BDS B1: 1559.052 ~ 1591.788MHz
Galileo L1: 1575.42 ± 1.023MHz
Data format NMEA-0183
Antenna Active antenna
OTHER
Power supply 5V
Operating voltage 5V / 3.3V (configured via 0Ω resistor)
Current consumption about 41mA (idle mode)
Operating temperature -40°C ~ 85°C
Storage temperature -45°C ~ 90°C
Dimensions 30.50mm × 65.00mm

 


Standard Raspberry Pi 40PIN GPIO


Compatible With Raspberry Pi Series Boards



Global Band Support Of NB-IoT/Cat-M/2G


NB-IoT: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66/B71/B85

Cat-M: B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26/B27/B28/B66/B85

GSM/GPRS/EDGE: 850/900/1800/1900MHz



Cloud Communication


Supports Communication Protocols Including

TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT



GNSS Positioning


Supports GPS, BeiDou, GLONASS, Galileo Positioning



What's On Board
 

  1. SIM7070G
  2. MP1482 power chip
  3. RT9193-33 power chip
  4. Raspberry Pi GPIO header
    for connecting with Raspberry Pi
  5. USB interface
    for testing AT Commands, getting GPS positioning data, etc.
  6. SIM7070G control interface
    for connecting with host boards like Arduino/STM32
  7. SIM card slot
    supports 1.8V SIM card ONLY
  8. GNSS antenna connector
  9. LTE antenna connector

   

  1. Module power key
  2. Network status indicator
  3. Power indicator
  4. Operating voltage selection
    A: set IO level as 5V
    B: set IO level as 3.3V (default)
  5. DTR selection
    A: DTR is connected to P26
    B: DTR is disconnected (default)
PWR selection
A: PWR is connected to P4 (default)
B: PWR is connected to power supply
Pinout Definition


Outline Dimensions


TÀI LIỆU THAM KHẢO


WIKI: www.waveshare.com/wiki/SIM7070G_Cat-M/NB-IoT/GPRS_HAT

MLAB : Đi kèm với code mẫu và hướng dẫn sử dụng (examples in wiringPi/python) - quý khách hàng liên hệ với đội ngũ kỹ thuật của MLAB để được tư vấn, hỗ trợ. Hotline (zalo) 086.262.8846


CHÍNH SÁCH BÁN HÀNG VÀ ĐỔI TRẢ


MLAB cam kết  cung cấp sản phẩm chính hãng đến tay khách hàng, cung cấp đầy đủ hóa đơn VAT cho cá nhân, các đơn vị doanh nghiệp, trường học, cơ quan nhà nước có yêu cầu.

Quý khách mua SIM 7070G dành cho Raspberry Pi tại MLAB, sẽ được hỗ trợ đổi mới (1 đổi 1 nhưng là đổi mới)  trong vòng 6 tháng nếu sản phẩm bị  lỗi do nhà sản xuất. Các bạn tham khảo chính sách bảo hành của MLAB tại đây

Viết đánh giá

Họ và tên:


Đánh giá của bạn: Lưu ý: Không hỗ trợ HTML!

Bình chọn: Xấu           Tốt

Nhập mã bảo vệ: