Danh mục sản phẩm
Linh kiện điện tử
KHUYẾN MÃI
Hỗ trợ trực tuyến
Hỗ trợ mua hàng

Mobile: 02436.231.170

Ms Huyền - Kinh doanh

Mobile: 0984.058.846

Tư vấn kỹ thuật Raspberry Pi

Mobile: 0862.628.846

Tư vấn kỹ thuật Module khác

Mobile: 0862.998.846

Trang chủ » SIM7600CE-JT1S 4G/3G/2G HAT dành cho Raspberry Pi

SIM7600CE-JT1S 4G/3G/2G HAT dành cho Raspberry Pi

SIM7600CE-JT1S 4G/3G/2G HAT dành cho Raspberry Pi
SIM7600CE-JT1S 4G/3G/2G HAT dành cho Raspberry Pi SIM7600CE-JT1S 4G/3G/2G HAT dành cho Raspberry Pi SIM7600CE-JT1S 4G/3G/2G HAT dành cho Raspberry Pi SIM7600CE-JT1S 4G/3G/2G HAT dành cho Raspberry Pi
Nhà sản xuất: Waveshare
Mã hàng: 22334
Trạng thái: Còn hàng
Giá: 1,398,000 vnđ
Số lượng:  
   - Hoặc -   

4G HAT FOR RASPBERRY PI

Enabling 4G / 3G / 2G Communication & LBS Positioning

Based on SIM7600CE-JT1S

ĐẶC ĐIỂM, TÍNH NĂNG

- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano

- Supports dial-up, telephone call, SMS, TCP, UDP, DTMF, HTTP, FTP, etc.

- Supports LBS base station positioning

- Onboard USB interface, for testing AT Commands, establishing a network connection, and so on

- Onboard CP2102 USB to UART converter, for serial debugging

- Breakout UART control pins, to connect with host boards like Arduino/STM32

- SIM card slot supports 1.8V/3V SIM card

- TF card slot for storing data like files, messages, etc.

- Onboard audio jack and audio decoder for making a telephone call

- 2x LED indicators, easy to monitor the working status

- Onboard voltage translator, the operating voltage can be configured to 3.3V or 5V via jumper

- Baudrate: 300bps ~ 4Mbps (default: 115200bps)

- Autobauding baudrate: 9600bps ~ 115200bps

- Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)

- Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT

- Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

THÔNG SỐ KỸ THUẬT

FREQUENCY BAND
LTE Cat-4 LTE-FDD: B1/B3/B5/B8
LTE-TDD: B38/B39/B40/B41
3G TD-SCDMA：B34, B39
UMTS/HSDPA/HSPA+: B1, B8
CDMA: 1X/EVDO BC0
2G GSM/GPRS/EDGE: 900/1800 MHz
SMS AND AUDIO
SMS Supported types: MT, MO, CB, Text, PDU
Storage: USIM card and ME (default)
Audio feature Supports echo cancellation
Supports noise reduction
OTHERS
Power supply 5V
Operating voltage 5V / 3.3V (configured via jumper)
Operating temperature -30°C ~ 80°C
Storage temperature -45°C ~ 90°C
Dimensions 56.01mm × 65.00mm

Standard Raspberry Pi 40PIN GPIO

Compatible With Raspberry Pi Series Boards, Jetson Nano

Dial-Up On Windows/Linux

LTE Cat-4: Up To 50Mbps (Uplink) / Up To 150Mbps (Downlink) *

3G (HSPA+): Up To 5.76Mbps (Uplink) / Up To 42Mbps (Downlink) *

* stands for idealized data rate, the actual data rate depends on factors like network coverage, traffic congestion, base station condition, etc.

Cloud Communication

Supports Communication Protocols Including TCP/UDP/FTP/FTPS/HTTP/HTTPS

HỖ TRỢ TELEPHONE CALL & SMS 

Making Telephone Call Or Sending SMS By AT Commands, With Onboard Audio Jack

 

CẤU TẠO BO MẠCH

  1. SIM7600CE-JT1S
  2. CP2102 USB to UART converter
  3. NAU8810 audio decoder
  4. TXS0108EPWR voltage translator
    • translates 3.3V/5V into 1.8V
  5. MP2128DT power chip
  6. SPX29302 power chip
  7. Raspberry Pi GPIO header
    • for connecting with Raspberry Pi
  8. SIM7600 control interface
    • for connecting with host boards like Arduino/STM32
  9. SIM card slot
    • supports 1.8V/3V SIM card
  10. TF card slot
    • for storing data like files, messages, etc.
  11. 3.5mm earphone/mic jack
    • for audio actions like making a telephone call
  12. USB interface
    • for testing AT Commands, and so on
  13. USB TO UART interface
    • for serial debugging, or log in to Raspberry Pi
 
  1. MAIN antenna connector
  2. Module power switch
  3. Network status indicator
  4. Power indicator
  5. UART selection jumper
    • A: access Raspberry Pi via USB to UART
    • B: control the SIM7600 by Raspberry Pi
    • C: control the SIM7600 via USB to UART
  6. PWR selection jumper
    • PWR - 3V3: auto startup on power-up
    • PWR - D6: startup/shutdown by the Raspberry Pi D6 pin
  7. Flight mode selection jumper
    • NC by default, no flight mode control pin
    • Flight - D4: flight mode is controlled by the Raspberry Pi D4 pin
  8. Operating voltage selection jumper
    • VCCIO - 3.3V: set operating voltage as 3.3V
    • VCCIO - 5V: set operating voltage as 5V
  9. USB connector solder pads
  10. BOOT forced programming solder pads

SƠ ĐỒ CHÂN KẾT NỐI

KÍCH THƯỚC BÊN NGOÀI

TÀI LIỆU THAM KHẢO

 

Viết đánh giá

Họ và tên:


Đánh giá của bạn: Lưu ý: Không hỗ trợ HTML!

Bình chọn: Xấu           Tốt

Nhập mã bảo vệ:



Tiếp tục