Module Zigbee DRF1605H (UART to Zigbee)

DRF1605H Zigbee Module 1.6km Transfer CC2530 Wireless Module UART to Zigbee
Features:
- NetWork creation automatically: after power on, the Zigbee network can create  automatically and the net can repair by itself.
- Data transmitter simply: the are two different methods to send data, first is  clarity transceive, second is point to point.
- Simply used: customer can use it as UART cable and ignore ZigBee protocol.
- UART Interface (TX & RX) to Zigbee
- Built-in RS485 direction control
-  High power module,the distance can reach 1600M
-  Customer can use it with ZigBee USB mother board as follow

Electronic Parameters: 
- Input voltage Standard : DC3.3V   Range: DC 2.6-3.6V 
- Temperature range: -40C~85C
- Serial port rate: 38400bps(Default),  9600bps, 19200bps, 38400bps, 57600bps, 115200bps 
- Radio frequency: 2.4G(2460MHz),  Can changed(2405MHz - 2480MHz,Step:5MHz) 
- Wireless protocol:  Zigbee2007 
- Distance  Visual distance: 1600  Meters 
- Working current  Sending: 110mA(Max)  50mA(Average)   Receiving:35mA(Max)  Standby: 40MA(Max) 
- Users can customize the low-power module (standard module does not have this feature) 
- Receiver sensitivity: -110  dBm 
- Chip:  CC2530F256,256KFLASH   
- Configurable Point:  Can be configured as Coordinator,Router 
- Default:Router,PAN ID=0x199B,Radio Channel=22(2460MHz) 
- Interface  UART 3.3V (TX & RX) 
- Built-in RS485 direction control, RS485 chip can directly drive 
    RS232 chip can directly drive 
    Direct USB to RS232 chip driver 
 
Mechanical parameters:
(Top View,Uint:mm)

Tài liệu, hướng dẫn sử dụng: Tải tại đây

Viết đánh giá