Danh mục sản phẩm
Hỗ trợ trực tuyến
Hỗ trợ mua hàng

Mobile: 02436.231.170

Ms Huyền - Kinh doanh

Mobile: 0984.058.846

Tư vấn kỹ thuật Raspberry Pi

Mobile: 0862.628.846

Tư vấn kỹ thuật Module khác

Mobile: 0862.998.846

Module nRF24L01+ (500m)

Module nRF24L01+ (500m)
Mã hàng: A11-nRF002
Trạng thái: Còn hàng
Giá: 160,000 vnđ
Số lượng:  
   - Hoặc -   

Product Description:

This module uses the newest 2.4GHz transceiver from Nordic Semiconductor, the nRF24L01+. This transceiver IC operates in the 2.4GHz band and has many new features! It can transmit over 500m easily.

Features

  • 2.0V~3.6V power supply
  • On-board ceramic 2.4GHz Antenna
  • 500m transmission Range
  • 250kbps to 2Mbit Data Rate
  • -40 ~ +85 Centigrade working temperature
  • Software selectable channel from 2400MHz to 2525MHz (125 Selectable channels)
  • Pins broken out : VCC, CE, CSN, SCK, MOSI, MISO, IRQ, GND
  • Standard 0.1" (2.54mm) spacing pins

 

 

Interface

Pin # Name Description
1 VCC Supply (+1.9V - +3.6V DC)
2 CE Chip Enable Activates RX or TX mode (Never >3.6V)
3 CSN SPI Chip Select
4 SCK SPI Clock
5 MOSI SPI Slave Data Input
6 MISO SPI Slave Data Output, with tri-state option
7 IRQ Maskable interrupt pin. Active low
8 GND Ground (0V)

Dimension

Frequency Test

Library for Arduino

Note

  • Wireless data transmission requires two or more modules to set up wireless link. Each module itself supports sending and receiving, but at the same time can only work in transmit mode or receive mode.
  • Maximum operating voltage of this module 3.6V. CE pin could not survice voltage over 3.6V. Otherwise the module might be damaged.
  • Transmission distance varies according to the testing enviornment. We tested it in open area.

Product List

  1. NRF24L01+ module
  2. Antenna

 

 

Viết đánh giá

Họ và tên:


Đánh giá của bạn: Lưu ý: Không hỗ trợ HTML!

Bình chọn: Xấu           Tốt

Nhập mã bảo vệ: