Hỗ trợ mua hàng : 02436.231.170 or 0984.058.846
Tư vấn kỹ thuật Raspberry Pi và USB to RS485, Module RS485 CAN HAT cho Raspberry Pi: 0862.628.846
Tư vấn kỹ thuật Module khác : 0866.828.846 or 0862.998.846
Module RS485 TO ETH cung cấp 1 giải pháp chuyển đổi giữa RS485 và cổng RJ45 Ethernet, có thể được định cấu hình thông qua trang web.
- M0 series 32-bit ARM processor, fast speed, high efficiency
- 10/100M Auto-MDI/MDIX ethernet interface, regardless of cross-over or straight-through cable
- Configurable RS485 baud rate (600bps~230.4Kbps), supports five parity check options: None, Odd, Even, Mark, Space
- Available working modes: TCP Server, TCP Client, UDP Server, UDP Client, HTTPD Client (supports GET and POST)
- Configurable via the webpage, AT commands, serial protocol, and network protocol provide configuration protocol that can be integrated to your own software
- Supports customized heartbeat packets, make sure the connection is truthful, as well as for actively retrieves sensor data
- Supports customized registration packets, auto-passing the registered packet as an identifier after the connection is established so that different devices can be distinguished
- Supports customized webpage, allows user to customize the module configuration page
- Supports RFC2217-like protocol, be able to communicate with devices whose serial setting (baud rate, data bit, etc.) may change
- KeepAlive mechanism, detects broken connections, auto re-connecting
- Supports time-out reboot (no-data reboot), ensures a long-term stable connection, configurable reboot time
- Supports DNS domain name resolution, configurable DNS server
- Supports DHCP, auto-obtained IP, or static IP
- Firmware is upgradable via the network
- Restore to factory settings via software and/or hardware
- Comes with a default MAC address, which is customizable
- Provided software: module configuration software, TCP/UDP testing tool, VCOM virtual serial port software
- Example code: host computer (socket ), VB, C++, Delphi, Android, iOS, etc.
- Ethernet:
+ Đầu nối: RJ45 4 chân
+ Tốc độ truyền thông: 10 / 100Mbps
+ Bảo vệ giao diện: cách ly điện từ 1,5KV
+ Giao thức: IP, TCP, UDP, ARP, ICMP, DHCP, DNS, HTTPD Client
+ Bộ nhớ đệm TX: 6Kbyte
+ Bộ nhớ đệm RX: 4Kbyte
- RS485:
+ Đầu nối: thiết bị đầu cuối vít (A +, B-, GND)
+ Bit dữ liệu: 5bit, 6bit, 7bit, 8bit
+ Dừng bit: 1, 2
+ Bit chẵn lẻ: Không có, Lẻ, Chẵn, Dấu, Dấu cách
+ Tốc độ truyền: 600bps ~ 230,4Kbps
+ Bộ nhớ đệm RX: 800byte
+ Kiểm soát luồng phần cứng: không có
+ Bảo vệ giao diện:
* Bảo vệ ESD 2KV
* Thanh ghi kéo lên / xuống RS485: 2.2KΩ
- Nguồn nuôi:
+ Nguồn cung cấp: 5.0 ~ 7.0V (khuyến nghị 5V)
+ Dòng hoạt động: 150mA (@ 5V)
+ Công suất tiêu thụ: <1W
+ Bảo vệ giao diện: chống ngược, bảo vệ ESD, chống đột biến
- Môi trường:
+ Nhiệt độ hoạt động: -25 ~ 75 ° C
+ Nhiệt độ bảo quản: -40 ~ 105 ° C
Wiki: www.waveshare.com/wiki/RS485_TO_ETH
Quý khách hàng có thể liên hệ với sđt:0862628846 (zalo) kỹ thuật viên của MLAB để được hỗ trợ, tư vấn và đặt hàng.